• INSTAGRAM
  • FACEBOOK
  • VK
  • YOUTUBE
  • SKYPE
445009, Samara region, mountains. Tolyatti st.
Novozavodskaya 2a, building 309

UDP 535 - 216.9 - V - HORIZON "START" VZ-AM

UDP 535 - 216.9 - V - HORIZON "START" VZ-AM
Price on request
Equipment:
  • Request a price from the manager
You choosed:
    Explosion protection markingPO Ex ia I Ma / 0Ex ia IIC T6 Ga X / Ex ia IIIC 850C Da X
    Marking of microprotection parametersLI: 1 µH, CI: 30 pF, UI: 27 V, II: 25 mA, PI: 0.8 W
    Degree of protection of the shellIP67
    Operating temperature-60°C<Ta<70°C
    Climatic performance 
    Supply voltage8-28V
    Current consumption in standby mode, no more80uA
    Own current consumption in the "Fire" mode, no more0.7mA
    Maximum current of the external additional resistor circuit, not more than100mA
    Case color:yellow
    Housing materialHigh impact polyamide
    Dimensions without cable entries134x108x46mm

    Selection table for additional resistors

    FACP typeConnection options
    Parallel connection (make)Sequential connection (on opening)
    LB-07Rd must ensure current consumption> 15 mA,Rd \u003d 11 kOhm, Rok \u003d 2 kOhm, VDok \u003d KD522.
    Rok \u003d 2 kOhm, VDok \u003d KD522.
    RayRd = 2.4 kOhm, Rok = 2.4 kOhm, VDok = KD521A.Rd = 2.2 kOhm, Rok = 2.4 kOhm, VDok = KD521A.
    PPK-2Rd = 1.2 kOhm, Rok = 3.6 kOhm, VDok = KD521A.Rd = 10.0 kOhm, Rok = 3.6 kOhm, VDok = KD521A.
    BolideRd \u003d 1.5 kOhm (3.0 kOhm - to determine double drawdown),Rd \u003d 8.2 kOhm (4.7 kOhm - to determine double drawdown),
    Rok \u003d 4.7 kOhm, do not install VDokRok \u003d 4.7 kOhm, do not install VDok
    Yakhont-16iRd \u003d 1.8 kOhm (4.0 kOhm - to determine double drawdown),Not applicable
    Rok = 8.2 kOhm, do not set VDok
    WERSRd \u003d 820 Ohm (1.8 kOhm - to determine double drawdown),Rd \u003d 10 kOhm (4.7 kOhm - to determine double drawdown),
    Rok = 7.5 kOhm, do not set VDokRok = 7.5 kOhm. Do not install VDoc

     

    AM - indicates the presence of a product modification with an address label.

    The IPR535 detector Horizont PUSK VZ is supplied with cable glands of various designs:

    • for open laying of the attached cable (index in the designation - K );
    • for laying the attached cable in the pipe G1/2 ( T-1/2 );
    • for laying the attached cable in the pipe G3/4 ( T-3/4 );
    • for connecting an armored cable ( B );
    • for connecting a cable in a metal hose RZTSH-15mm or 20mm ( KM15, KM20 ).


    The IPR535 detector Horizon PUSK VZ is supplied with two cable glands, which allow the detector to be installed in an alarm loop with a round cable with a diameter of 6-10 mm.