MANUAL CALLS IP512 HORIZONT OP-N

Manual fire detectors and remote start devices comply with the requirements of TR EAEU 043/2017, GOST R 53325-2012.

Manual fire detectors of the IP 512 HORIZONT OP-N series are manufactured in two versions with an addressable expander IP 512-451.5-A-HORIZONT OP-AM-N and without it (without an address label) IP 512-451.4-A-HORIZONT OP-N and are used to manually trigger a fire alarm.

Remote start devices of the UDP 512 HORIZONT "PUSK" OP - N series are manufactured in two versions with an address expander UDP 512 - 451.7 - V - HORIZONT "PUSK" OP-AM - N and without it (without an address label) UDP 512 -451.6 - V - HORIZONT "PUSK" OP - N and are components of a block-modular PPU, designed for manual start of fire extinguishing systems, smoke removal, etc.

UDP 512 series remote starters UDP 512 HORIZON EMERGENCY EXIT OP-N are manufactured in two versions with address expander UDP 512-451.19-A-HORIZON EMERGENCY EXIT OP-AM and without it (without address label) UDP 512-451.18 - A - HORIZON "EMERGENCY EXIT" OP - N and are components of a block-modular PPU designed to unlock emergency exits.

Equipment with an individually assigned address interacts with the S2000-AP1 version 2 address expander manufactured by Bolid LLC. The address version of the detector is used with the two-wire communication line controller "S2000-KDL" or "S2000-KDL-2I" as part of the integrated security system "Orion". https://bolid.ru/ .

Case material of IPR and UDP is corrosion-resistant stainless steel.

IPR, UDP is equipped with two cable glands of the KV, KV series TU 27.33.13-359-81888935-2019. Connecting thread of cable glands M20x1.5. Cable glands allow you to enter and exit round cables of various diameters:

for open laying of the attached cable (index in the designation - K);
for laying the attached cable in a pipe with an internal or external thread G1 / 2 or M20x1.5 (TV1 / 2, TH1 / 2, TV20, TH20);
for connecting an armored cable with a double seal (B)
for connecting a cable in a metal hose RZTSH-10mm, RZTSKh-12mm, RZTSKh-15mm or RZTSKh-20mm (KM10, KM12, KM15, KM20).

General industrial manual fire detectors and remote start devices have differences in marking, because differ in purpose.

IP 512-451.4 - A - HORIZON OP - N	Manual fire detector class A (one-action activation) with addressless design
IP 512-451.5 - A - HORIZON OP-AM - N	Manual fire detector class A (one-action activation) with addressable design
UDP 512-451.6 - V - HORIZON "START" OP	Class B remote starter (two-action activation) with non-addressed version
UDP 512-451.7 - V - HORIZON "START" OP-AM - N	Class B remote starter (two-action activation) with addressable version
UDP 512-451.18 - A - HORIZON "EMERGENCY EXIT" OP - N	Class A remote starter (single-action activation) with non-addressed version
UDP 512-451.19 - A - HORIZON "EMERGENCY EXIT" OP-AM - N	Class A remote starter (single-action activation) with addressable design

	IP 512-451.4 - A - HORIZON OP - N	UDP 512-451.6 - V - HORIZON "START" OP	UDP 512-451.18 - A - HORIZON "EMERGENCY EXIT" OP - N
	IP 512-451.5 - A - HORIZON OP-AM - N	UDP 512-451.7 - V - HORIZON "START" OP-AM - N	UDP 512-451.19 - A - HORIZON "EMERGENCY EXIT" OP-AM - N
Case color	Red	Yellow	Green
Material	Stainless steel
Activation class according to GOST 53325	A (one action)	B (two actions)	A (one action)
Ambient temperature	-60°С … +75°С
Degree of protection of the shell	IP66/67
Rated supply voltage	12V - 24V
Own current consumption, no more Non-address execution: in standby mode in fire mode Address execution: in standby mode in fire mode	300uA 1.2mA 23mA 20mA
Maximum allowable current in alarm mode, no more	100mA
The maximum allowable switching current on the relay contacts, no more	2A
The maximum allowable voltage on the relay contacts, no more	250V
Overall dimensions, mm, no more (* without cable glands)	113*х109х86

Designation when ordering:

X ₁ -	X ₂ -	X ₃ -	X ₄
1	2	3	4

Type, number and version of the device (see Table 1):
IP 512-451.4 - A - HORIZON OP;
IP 512-451.5 - A - HORIZON OP-AM;
UDP 512-451.6 - V - HORIZON "START" OP;
UDP 512-451.7 - V - HORIZON "START" OP-AM;
UDP 512-451.18 - A - HORIZON "EMERGENCY EXIT" OP;
UDP 512-451.19 - A - HORIZON "EMERGENCY ENTRANCE" OP-AM.
Body material:
H - stainless steel;
Cable gland type:
K - for open cable laying with a diameter of 6.5-13.9 mm;
TV1 / 2 (TV20) - for laying a cable with a diameter of 6.5-13.9 mm in a pipe with a connecting internal thread G1 / 2 or M20x1.5;
ТН1/2 (ТН20) - for laying a cable with a diameter of 6.5-13.9 mm in a pipe with a connecting external thread G1/2 or M20x1.5;
B - for laying with double sealing of an armored cable with an outer part with a diameter of 15.0-21.0 mm and an inner sheath diameter of 6.5-13.9 mm;
KM10 - for laying a cable with a diameter of 3.1-8.6 mm in the RZTsH-10 metal hose;
KM12 - for laying a cable with a diameter of 3.1-8.6 mm in the RZTsH-12 metal hose;
KM15 - for laying a cable with a diameter of 6.1-11.7 mm in the RZTsH-15 metal hose;
KM20 - for laying a cable with a diameter of 6.5-13.9 mm in the RZTsH-20 metal hose.
Designation of climatic version according to GOST:
HL - for macroclimatic regions with a cold climate;
UHL - for macroclimatic regions with a temperate and cold climate;
OM - for macroclimatic regions with both temperate cold and tropical maritime climates, including ships with an unrestricted navigation area.

MANUAL CALLS IP512 HORIZONT OP-N

THIS SITE USES COOKIES