• INSTAGRAM
  • FACEBOOK
  • VK
  • YOUTUBE
  • SKYPE
445009, Samara region, mountains. Tolyatti st.
Novozavodskaya 2a, building 309

ORBITA MK M2 C 1ExdIIBT6Gb

ORBITA MK M2 C 1ExdIIBT6Gb
Price on request
Equipment:
  • Request a price from the manager
You choosed:

    Light fire alarms.

    Series Orbita MK M2 S

    Annunciators of the Orbita MK M2 S series are designed to give alarm light signals in fire and security alarm systems, as well as to indicate equipment operation modes and attract the attention of personnel in emergency situations. Annunciators can be used with any fire and burglar alarm control and monitoring devices.Type and level of protection 1 Ex db IIC T 6 Gb / Ex tb IIIC T 85 ° C Db, PB Ex db I Mb/ 1 Ex db IIC T6 Gb/Ex tb IIIC T85 °C Db according to GOST R IEC 60079-0-2011 .Annunciators can be used in hazardous areas and rooms of classes 1 and 2 in accordance with GOST IEC 60079-10-1-2011 and GOST IEC 60079-14-2011.

     

     

    The sirens differ in supply voltage:

    • 12-27V DC;
    • 220V AC.

     

    Distinctive features:

    • Fully sealed housing with IP67 degree of protection;
    • two-stage notification with automatic or external control;
    • independent programming by the user of the operating mode;
    • increased brightness and large viewing angle of the light alert;
    • a wide range of certified cable glands for any type of connection.

     

    The posts are equipped with explosion-proof cable glands of the KV, KV series TU 27.33.13-138-81888935-2019.Connecting thread of cable glands M20x1.5.Cable glands allow you to enter and exit a round cable of various diameters

    Operating modes

    Alert   Mode Parameters
    light 1 step strobe - flashes;
    strobe - flashes;
    blink 1;
    flashing 2;
    flash 3;
    flashing 4;
    permanent;
    70 ms at 1.3Hz
    70 ms at 2.6Hz
    frequency 0.75Hz;
    frequency 1.5Hz;
    frequency 3Hz;
    frequency 6Hz;
    constant burning;
    2 step strobe - flashes;
    strobe - flashes;
    blink 1;
    flashing 2;
    flash 3;
    flashing 4
    permanent;
    70 ms at 1.3Hz
    70 ms at 2.6Hz
    frequency 0.75Hz;
    frequency 1.5Hz;
    frequency 3Hz;
    frequency 6Hz;
    constant burning;

    The operating mode is selected by the user independently using dip-switches.Single-stage or two-stage modes are available. The second stage is switched on automatically after a fixed time of 3 minutes, or by means of an external control voltage.The type of alarm signal is selected by the user independently for each stage using dip-switches.

    7 operating modes are possible: blinking with frequencies 0.75Hz, 1.5, 3, 6Hz; 70ms strobe flash at 1.3Hz; 70ms strobe flash at 2.6Hz; constant glow.In the "strobe" mode, the brightness is 2 times higher than the constant glow or flashing modes.

    Specifications

    Explosion protection marking

    1 Ex db IIC T6 Gb/Ex tb IIIC T85 °C Db,
    PB Ex db I Mb/ 1 Ex db IIC T6 Gb/Ex tb IIIC T85 °C Db

    Sheath protection degree

    IP67

    Climatic performance

    UHL1

    Operating temperature range

    -60С<Ta<+70С

    Rated supply voltage

    12V - 24V

    direct current;

    220V AC

    Consumption current, no more

    1.7Adc;

    0.12Aac

    Operating modes

    single stage

    two-stage

    Light Alert Color

    Red (default);

    Green;

    Yellow;

    Blue;

    White;

    Light source type

    high brightness LED

    Light intensity, not less

    300 cd

    Housing material

    Aluminium alloy

    Stainless steel

    Overall dimensions (LxWxH), not more than:

    290x150x150

    Weight, not more than:
    Aluminium alloy
    stainless steel
     

    2.5kg

    5kg

    Designation system when ordering

    ORBIT MK M2 WITH - A - TO
    one 2 3 4

    1 - a series of detectors;

    2 - notification type:
    C - light;

    3 - body material:
    A - aluminum alloy;
    H - corrosion-resistant steel 12X18H10T;

    4 - fitting type:
    B - for an armored cable with an outer passage diameter of 12.5-20.9 mm;
    T3/4 - for laying a cable in a pipe with a connecting thread G3/4-B, the diameter of the outer insulation of the cable is 8 - 12 mm;
    T1/2 - for laying a cable in a pipe with a connecting thread G1/2-B, outer cable insulation diameter 8 - 10 mm;
    K - for a cable for open laying with an outer insulation diameter of 6.5-13.9 mm;
    KM15 - for a cable or armored cable in a RZ-TsKh-15mm metal hose;
    KM20 - for a cable or armored cable in a RZ-TsKh-20mm metal hose.