POINT-TYPE DETECTOR IP212 TRION

The detector is designed to detect fires accompanied by the appearance of smoke or combustion products of low concentration in closed rooms of various buildings and structures, and to send a "Fire" notification to the control panel. The detector can be installed in hazardous areas of premises and outdoor installations of class 0 and lower, depending on the version.

Overview of the TRION VZ detector

Overview of the TRION MK detector

Do not install VD

AM - indicates the presence of a modification of the product with an address label.

IP 212 Trion is a detector of maximum action and can be used in short circuit alarm loops (parallel connection).The "Fire" alarm notification is provided by an abrupt decrease in the detector resistance.
The detector has a built-in optical indication of actuation.
To adjust to the Control Panel type, a replaceable current-limiting resistor is used.The alarm signal remains after the end of exposure to combustion products. The detector is returned to standby mode from the control panel.
The IP 212 Trion VZ detector is supplied with two cable glands that allow the detector to be installed in an alarm loop with a round cable 6-10mm in diameter
The IP 212 Trion MK detector is supplied with cable glands of various designs:
- for open laying of the attached cable with a diameter of 6-12 mm (index in the designation - K );
- for laying the attached cable in the pipe G1 / 2 ( TG-1/2 );
- for laying the attached cable in the G3 / 4 ( TG-3/4 ) pipe;
- for connecting armored cable with a diameter of 6-12 mm ( B).

POINT-TYPE DETECTOR IP212 TRION

Overview of the TRION VZ detector

Overview of the TRION MK detector

THIS SITE USES COOKIES