Trion OP

Trion OP detector

The detector is designed to detect fires accompanied by the appearance of smoke or combustion products of low concentration in closed rooms of various buildings and structures, and to send a "Fire" notification to the control panel.

Specifications

Name	SP 212 Trion OP
Sheath protection degree	IP67 / IP31
Operating temperature range	-40 ° C .. + 75 ° C
Supply voltage range	10V .. 30V
Consumption current:
in standby mode, no more	90μA
in alarm mode, no more	100mA
Detector sensitivity	0.05 dB / m .. 0.2 dB / m
Detector response time, no more	5 sec.

IP 212 Trion OP is a detector of maximum action and can be used in short circuit alarm loops (parallel connection).The "Fire" alarm notification is provided by an abrupt decrease in the detector resistance.
The detector has a built-in optical indication of actuation.
To adjust to the Control Panel type, a replaceable current-limiting resistor is used.The alarm signal remains after the end of exposure to combustion products. The detector is returned to standby mode from the control panel.
The IP 212 Trion OP detector is supplied with two cable glands that allow the detector to be installed in an alarm loop with a round cable 6-10mm in diameter

Trion OP

Trion OP detector

Specifications

THIS SITE USES COOKIES